How to Install OEM Style Floor Mats in an FD3S

By Garage Alpha: Titanium Hood Props, Carbon Fiber Door Sills ... | Published: 2026-10-20

Category: How-to Guides

Learn how to install OEM style floor mats in your Mazda RX-7 FD3S with this step-by-step guide, including fitment tips and common mistakes to avoid.

Quick Answer

Installing OEM style floor mats in your FD3S is straightforward: remove the old mats, clean the floor, position the new mats with the driver-side anchor aligned, and secure them to prevent slipping. Pay attention to the LHD-specific fitment to ensure a perfect match.

Why Proper Fitment Matters

The Mazda RX-7 FD3S has a driver-focused cockpit with a floor pan that differs between LHD and RHD models. Using mats designed for the wrong side can lead to poor coverage, interference with pedals, or an untidy look. OEM style mats are cut to match the factory contours, so they sit flat and stay put without bunching under the clutch or brake.

Another reason to get the fitment right: the driver-side mat has a mounting hook or anchor point in many FD3S examples. If your mat lacks the corresponding grommet or hole, it can slide forward and jam the pedals. Always check for this feature before installation.

Installation Steps

Remove old mats and clean the floor: Take out the existing mats and vacuum the floor thoroughly. Wipe down the carpet with a damp cloth to remove dust or debris that could prevent the new mats from lying flat. Check for any sharp edges or protruding clips that could snag the new mats.
Position the driver-side mat first: Place the driver mat with the heel pad aligned to the factory position. If your mat has a grommet for the floor hook, align it over the anchor and press down firmly to secure it. Make sure the mat does not interfere with the clutch or brake pedal travel—slide it back if it touches.
Fit the passenger-side mat: Position the passenger mat symmetrically, ensuring it covers the footwell without overlapping the transmission tunnel or door sill. Smooth out any wrinkles by pulling gently from the center outward. Verify that the mat does not block the seat rail adjustment on the passenger side.
Secure the mats and test pedal operation: If your mats came with anti-slip backing or clips, engage them. Then, sit in the driver seat and press each pedal fully to confirm there is no interference. Adjust the mat position if needed. Re-check after a short drive—mats can shift during initial use.

Product Facts

Mazda RX-7 [FD3S] LHD Floor Mats - OEM Style: OEM Style Floor Mats for the 1993-1995 3rd Gen Mazda RX-7 [FD3S] are available in FORZA, GT, or LUX styles with multiple color options. Choose the style that matches your interior and driving habits—FORZA for sporty grip, GT for a balanced look, LUX for a plush feel—so the mats look and perform as intended.
Mazda RX-7 [FD3S] LHD Floor Mats - OEM Style