How to Fit OEM Style Floor Mats in a MKIV Supra

By Garage Alpha: Titanium Hood Props, Carbon Fiber Door Sills ... | Published: 2026-10-22

Category: How-to Guides

Learn how to install OEM style floor mats in your Toyota Supra MKIV with our step-by-step guide, including fitment tips for LHD models.

Quick answer

To fit OEM style floor mats in your MKIV Supra, start by removing the old mats and cleaning the floor, then position the new mats with the heel pad aligned to the pedals, and secure them using the factory retention points.

Why fitment matters for LHD models

The Toyota Supra MKIV was sold in both left-hand drive (LHD) and right-hand drive (RHD) configurations. Floor mats designed for one layout may not align perfectly with the pedals and footwell contours of the other. This guide focuses on LHD models, but the principles apply to RHD as well.

If you choose a mat style with a heel pad, position it so it sits directly under the throttle pedal to reduce wear and improve comfort during long drives.

Choosing the right mat style

OEM style floor mats for the MKIV Supra come in different configurations, including materials, colors, and serged border options. Before you start the installation, confirm that the mats you have are designed for your model year (1993-1998) and your vehicle's layout.

If you have an LHD Supra, ensure the mats are cut for LHD. Using RHD mats can result in poor fitment around the pedals and may interfere with driving.

Step-by-step installation process

Remove old mats and clean the floor: Take out the existing floor mats and vacuum or wipe down the carpet to remove dirt and debris. This prevents particles from getting trapped under the new mats and causing uneven wear. Check for any sharp objects or worn areas in the carpet that could damage the new mats.
Position the driver-side mat: Place the driver-side mat in the footwell, aligning the heel pad (if present) with the throttle pedal. Ensure the mat lies flat and does not bunch up near the pedals. Verify the mat does not interfere with the clutch or brake pedal travel before securing it.
Secure the mat using retention points: If your Supra has factory retention hooks or clips, align the mat's grommets or holes with them and press down to lock the mat in place. If no retention points exist, ensure the mat is positioned so it stays put during driving. Test the mat's grip by pressing on it with your foot; it should not slide forward.
Install the passenger-side mat: Repeat the process for the passenger side, aligning the mat with the footwell contours. For LHD models, the passenger mat is typically symmetrical but check for any transmission tunnel curvature. Make sure the mat does not cover any vents or wiring access points on the passenger side.
Final adjustment and test: Sit in the driver's seat and simulate pedal operation to ensure nothing obstructs your feet. Adjust the mats if they shift or bunch up. Take a short test drive to confirm the mats stay in place and feel comfortable.

Product spotlight

Toyota Supra [MKIV] LHD Floor Mats - OEM Style: These OEM Style Floor Mats are designed for the 1993-1998 JZA80 Toyota Supra MKIV and are manufactured in the United States. This ensures a precise fit for your MKIV Supra and supports a quality build that aligns with the original floor contours.
Toyota Supra [MKIV] LHD Floor Mats - OEM Style