Back to Blog
Tips & Care 2026-11-21 Garage Alpha: Titanium Hood Props, Carbon Fiber Door Sills ... 0 views

FD3S Carbon Fiber Door Sills: Fit and Care Guide

FD3S Carbon Fiber Door Sills: Fit and Care Guide

Learn how to install and maintain Mazda RX-7 FD3S carbon fiber door sills. Covers fitment, weave and logo options, and care tips for long-lasting JDM interior upgrades.

What These Sills Replace

The factory door sills on a 1993-2002 Mazda RX-7 FD3S are plain plastic pieces that can look worn or dated over time. A set of carbon fiber door sills is a direct bolt-on replacement that upgrades the look every time you open the door. The Mazda RX-7 [FD3S] Carbon Fiber Door Sills from Garage Alpha use 3M molding tape for installation—no drilling or permanent modification required.

Product Details

  • Mazda RX-7 [FD3S] Carbon Fiber Door Sills: Each set is a true bolt-on replacement for the stock plastic door sill using provided 3M molding tape. Installation is straightforward and reversible, making this an accessible interior upgrade for any FD3S owner.
    Mazda RX-7 [FD3S] Carbon Fiber Door Sills
    Mazda RX-7 [FD3S] Carbon Fiber Door Sills
  • Mazda RX-7 [FD3S] Carbon Fiber Door Sills: The sills are available in four carbon weaves, with the Twill 2x2 being one of the options. Logo colors include Black, Red, White, or a flat no-logo version. You can match your interior theme or exterior accents, from subtle to bold.
  • Mazda RX-7 [FD3S] Carbon Fiber Door Sills: The RX-7 logo is offered in the Traditional RX-7 font or the Modern font to complement other modern emblems. Allows a cohesive look if you have already upgraded other badges or exterior trim.

Installation Steps

Installation is a simple adhesive process. Work in a clean, dry area at moderate temperature for best tape adhesion.

  1. Clean the surface: Thoroughly clean the factory plastic door sill with isopropyl alcohol or a similar degreaser to remove wax, dirt, and oils. Let it dry completely.
  2. Position the sill: Dry-fit the carbon fiber sill over the plastic sill to confirm alignment before removing the tape backing. The part is shaped to match the stock contour.
  3. Apply the tape: Peel the backing from the pre-applied 3M molding tape on the underside of the carbon sill. Press firmly into place, working from one end to the other to avoid air bubbles.
  4. Apply pressure: Press the entire sill firmly. For best adhesion, follow the supplied product instructions for curing time and avoid car washes or heavy rain as directed.

Choosing Your Variant

The Mazda RX-7 [FD3S] Carbon Fiber Door Sills are handmade, so not every weave and logo color combination is always on the shelf. If you can add to cart, it is in stock. Special orders or out-of-stock combinations may take up to 6 weeks for delivery, so plan ahead if you want a specific look. The available weave is Twill 2x2, and logo colors include Black, Red, White, or a flat no-logo option. Logo style can be Traditional or Modern font.

Care Tips for Long Life

Carbon fiber is durable but can be scratched by abrasive cleaners or dirty shoes. Wipe the sills with a microfiber cloth and mild soapy water as needed. Avoid harsh solvents or waxes that could cloud the clear coat. The 3M tape bond is strong, but if you ever need to remove the sills, warm the adhesive with a heat gun or hair dryer on low and peel gently. The sills are designed for the FD3S only; they will not fit other RX-7 generations without modification.

Related Articles

Customer Service
Home
Products
Cart
Profile