What This Hood Prop Replaces
The stock steel hood prop on your Mitsubishi Lancer Evolution VII, VIII, or IX [CT9A] does the job, but it's heavy and plain. The Argon Bubble Titanium Hood Prop is a direct replacement that weighs approximately 40% less than the stock piece while adding a distinctive look under the hood. It fits all USDM and JDM models from 2001-2005.
Product Evidence
- Mitsubishi Evo VII / VIII / IX [CT9A] Titanium Hood Prop: Grade 5, Ti-6Al-4V Titanium construction Grade 5 titanium offers a great strength-to-weight ratio and corrosion resistance, making it ideal for underhood use.
![Mitsubishi Evo VII / VIII / IX [CT9A] Titanium Hood Prop](/uploads/sites/3926/import-1788876083350-379369349.jpg)
Mitsubishi Evo VII / VIII / IX [CT9A] Titanium Hood Prop - Mitsubishi Evo VII / VIII / IX [CT9A] Titanium Hood Prop: Weighs a scant 4.0 oz At just 4 ounces, this prop is noticeably lighter than the stock steel unit, reducing overall weight and making it easier to handle.
- Mitsubishi Evo VII / VIII / IX [CT9A] Titanium Hood Prop: Available in Polished or Burnt Finish You can choose a high-luster polished look or a burnt titanium finish to match your engine bay style.
Installation Steps
Installing the Titanium Hood Prop is straightforward and requires only basic hand tools. No drilling or modification is needed.
- Step 1: Remove the stock hood prop: Open the hood and secure it with a secondary support. Unclip the stock prop from its ball studs on the hood and the fender. Set the stock prop aside.
- Step 2: Install the titanium prop: Align the titanium prop's ball socket with the same ball studs. Press firmly until the socket snaps into place. Repeat for both ends.
- Step 3: Test operation: Lower the hood and check that the prop holds it securely. The titanium prop should function identically to the stock unit.
Fitment Notes
This prop is designed specifically for the Mitsubishi Lancer Evolution VII, VIII, and IX [CT9A] chassis. It fits both USDM and JDM models without modification. The prop uses the existing ball studs, so no additional hardware is needed.
If your stock ball studs are worn or damaged, replace them before installing the titanium prop to ensure a secure fit.
Choosing Your Finish
The titanium hood prop is available in two finishes: Polished and Burnt. The polished finish offers a bright, mirror-like appearance, while the burnt titanium finish shows heat-induced colors ranging from blue to purple. Both options are equally durable; the choice is purely cosmetic.


![Mitsubishi Evo VII / VIII / IX [CT9A] Titanium Hood Prop](https://garagealphaez.com/api/image-optimizer?src=%2Fuploads%2Fsites%2F3926%2Fimport-1788876083350-379369349.jpg&w=800&q=86)